For processing gasoline and diesel engines, manual transmissions, gearboxes.
Increased engine and transmission life
Reduced operating and maintenance costs
RUTEC provides:
Increased reliability of the mechanism
Why RUTEC
Reduction of specific fuel / energy consumption by 5-12%. Reduction of FCM consumption to the rated values. Reduction of noise / vibration by 15-30%.
The additive is safe and doesn't affect the properties of other lubricants
The basis of RUTEC is a finely dispersed powder of magnesium and iron gyrosilicates without abrasives.
This guarantees the safety of use and expands the list of units for which additives can be used.
The stability of the chemical composition isn't less than 75%. RUTEC doesn't affect the properties of the lubricants used as a carrier.
Chemical purity: at least 80% of active substances.
1
2
The additive start their work within 20 minutes
Cleaning of surfaces without abrasive wear and additional deformation within 20-30 minutes.
Changes in the crystal lattice of the surface in places of deformation.
Within 5-6 hours after application during normal operation, you will notice changes.
1
2
3
There are 3 main stages of work of the RUTEC additive.
RUTEC key differences
Universal for 100%
For mechanisms whose resources are depleted very quickly.
For mechanisms, the deterioration in performance of which depends on the degree of wear in the friction pairs of parts. To eliminate the consequences of wear in friction pairs of mechanisms.
Safe for equipment (machinery)
Doesn't contain abrasives, doesn't create additional wear, doesn't change the properties of lubricants.
Manual
The additive is easy to use and doesn't require any special skills
Step 1
Stir the required amount of concentrate in 100-200 ml of engine oil of the same brand as the one poured into the engine.
1
Step 2
Pour the resulting mix into the engine through the filler neck or through the hole in the oil dipstick.
2
Step 3
Start the engine and keep it idling for 20 - 25 minutes (to spread the composition through the system).
3
Step 4
Do several re-gasings 20 minutes after application.